供应模具试水机 高华模具试压泵

模具试水机
又名:试水机,运水机,模具运水机,试压泵,模具试压泵
**:KYOWA,高华
产地:日本
型号:(手动)T-50K-P,T-100K
用途:用于塑胶模具运水,检查模具冷却水道是否有渗漏的现象,避免因渗漏上下模具的繁劳.
SPECIFICATIONS(50kg/㎝² pressure gauge is avaiiable if desired)
Item
Model
Maximum
Pressure
Plunger
Diameter
Stroke
Rate of Water
Suction
Per Stroke
Capacity of
Water Tank
Size of
Discharge
Port
Weight
Dimensions
L×H×W
T-50K-P
5Mpa
(50kg/㎝²)
22mm
35mm
13c.c.
4.5￡
Plastic
tank
1/4
3.3kg
320*300*200
T-100K
10Mpa
(100kg/㎝²)
22mm
35mm
13c.c.
5.2￡
steel
tank
1/4
7.0kg
370*300*210
Accessories( T-50K-P): Pressure gauge1/4PT=1 Pressure hose=1 Union joint1/2=1 Bushing1/2*1/4=1
Accessories( T-100K): Pressure gauge1/4PT=1 Ultra high pressure hose1/4PF*1M=1 1/4nipple=1
* Specifications may be subject to change without notice.
*KYOWA’s products are patented.Give careful attention to imitations
FEATURES OF KYOWA TESTER
1.High-precision stainless steel(sus 304)ball value is applied as the valve．
2.Valve seat is replaceable with ease．
3.Water tank of rust-free plastic(P.P.) construction assures unchanging cleanliness
(Models T-50K and T-100K are of vinyl-coated steel sheet construction.)
4.The plunger packing used is standard product, O-ring No.P-22 which is available in local hardware dealers．
5.All fulcrum pins applied are made of stainless steel．
6.A full range of accessories are provided to permit on-the-spot job
7.Matchless compact and light-weight design in the world．
产品单价 : 1000.00 ;
产品别名 : 试水机,运水机,模具运水机,试压泵,模具试压泵 ;
体积 : 320*300*200mm ;
重量 : 3.3（kg） ;
适用范围 : 用于塑胶模具运水,检查模具冷却水道是否有渗漏的现象,避免因渗漏上下模具的繁劳. ;
用途 : 试压泵 ;
性能 : 自动 ;
驱动方式 : 磁力 ;
叶轮吸入方式 : 单吸式 ;
泵轴位置 : 卧式 ;
材质 : 多款可选 ;
压力 : 50kg（Mpa） ;
型号 : T-50K-P,T-100K ;
** : KYOWA,高华 ;